Canon Pixma E410 Printer

Rs.26,400.00

Canon Pixma E410 Printer
Compact All-In-One for Low-Cost Printing

The Ink Efficient E410 is designed to give you an affordable printing experience at low running cost of up to 400 pages with the high-capacity ink cartridge.

Available in Black and Black-Grey.

  • Print, Scan, Copy
  • Print Speed (A4, ISO): up to 8 / 4 ipm (mono/colour)
  • USB 2.0
  • Recommended Monthly Print Volume: 50 – 200 pages
Buy from Printers.lk

Description

Canon Pixma E410 Printer

Features
Low Cost Cartridges

Affordable ink cartridges for high quality printing.

Compact and Lightweight

Allow the printer to easily fit into even the smaller spaces and shelves in a home.

Auto Power ON

Auto Power ON detects a print command and will automatically switch the printer on with a USB connection and automatically switches off after a specific timing.

Print
Print Head / Ink
Type Fine Cartridge
Number of Nozzles Total 1,280 nozzles
Ink Cartridges PG-47, CL-57S
(Optional: CL-57)
Maximum Printing Resolution 4800 (horizontal)*1 x 1200 (vertical) dpi
Print Speed

Based on ISO/IEC 24734
Click here for summary report
Click here for Document Print and Copy Speed Measurement Conditions

Document (ESAT/Simplex) Approx. 8.8 ipm (black) / 4.4 ipm (colour)
Printable Width Up to 203.2 mm (8 inch)
Printable Area
Bordered Printing Top margin: 3 mm, Bottom margin: 16.7 mm, Left/Right margin: 3.4 mm (LTR: Left: 6.4 mm, Right: 6.3 mm)
Recommended Printing Area
Top Margin 31.6 mm
Bottom Margin 29.2 mm
Paper Size A4, A5, B5, Letter, Legal, 4×6″, 5×7″, Envelopes (DL, COM10), Custom size (width 101.6 – 215.9 mm, length 152.4 – 676 mm)

* F4 is possible via custom size settings.

 

Paper Handling Rear Tray (Maximum Number)
Plain Paper A4, A5, B5, Letter = 60
Legal = 10
Photo Paper Plus Glossy II (PP-201) 4×6″ = 20, 5×7″ = 10
Glossy Photo Paper (GP-508) 4×6″ = 20
Envelope European DL / US Com. #10=5
Paper Weight
Rear Tray Plain Paper: 64-105 g/m²,
Canon specialty paper: max paper weight: approx. 275 g/m² (Photo Paper Plus Glossy II, PP-201)
Ink End Sensor Dot count
Print Head Alignment Manual
Scan
Scanner Type Flatbed
Scanner Method CIS (Contact Image Sensor)
Optical Resolution

Optical resolution scan is available, only when you use TWAIN Driver.

600 x 1200 dpi
Selectable Resolution 25 – 19200 dpi
Scanning Bit Depth (Input/Output)
Grayscale 16 bit/8 bit
Colour 48 bit / 24 bit (RGB each 16 bit / 8 bit)
Line Scanning Speed
Grayscale 1.2 ms/line (300 dpi)
Colour 3.5 ms/line (300 dpi)
Scanning Speed
Reflective (A4 Colour / 300dpi) Approx. 19 sec
Maximum Document Size
Flatbed A4/LTR (216 x 297 mm)
Copy
System Requirements
Windows 10 / 8 / 7 SP1, Windows Vista SP2

Mac OS X 10.8.5 and later

Interface Hi-Speed USB 2.0
Operating Environment
Temperature 5 – 35°C
Humidity 10 – 90% RH (no dew condensation)
Recommended Environment  
Temperature 15 – 30°C
Humidity 10 – 80% RH (no dew condensation)
Storage Environment
Temperature 0 – 40°C
Humidity 5 – 95% RH (no dew condensation)
Quiet Mode Available
Acoustic Noise (PC Print) 46.0 dB(A)
Power AC 100-240 V, 50/60 Hz
Power Consumption
OFF Approx. 0.4 W
Standby (Scanning lamp is off) Approx.1.0 W
Copying Approx. 9 W
Printing Approx. 9 W
Dimension (WxDxH) Approx. 426 x 306 x 145 mm
Weight Approx. 3.4 kg
Page Yield

 

  1. Ink droplets can be placed with a pitch of 1/4800 inch at minimum
  2. Document print speeds are the averages of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734. Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer. Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
  3. TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.
  4. Optical resolution is a measure of maximum hardware sampling resolution, based on ISO 14473 standard.
  5. Increasing the scanning resolution will limit the maximum possible scanning area.
  6. The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.
  7. Colour document scan speed is measured with ISO / IEC 29183 Target A. Scan speed indicates the time measured between pressing the scan button of the scanner driver and the on-screen status display turns off. Scan speed may vary depending on system configuration, interface, software, scan mode settings and document size etc.
  8. Copy speeds are the average of sFCOT and sESAT, ISO/IEC 29183. Copy speeds (ADF) are ESAT of copy in sequence, ISO/IEC24735. Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warm-up time.
  9. Please visit http://asia.canon to check OS compatibility and to download the latest driver updates.
  10. The performance of the printer may be reduced under certain temperature and humidity conditions
  11. For the temperature and humidity conditions of papers such as photo paper, refer to the paper’s packaging or the supplied instructions.
  12. Acoustic Noise is measured based on ISO7779 standard with default setting.
  13. Copy: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
  14. Print: When printing ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
  15. Declared yield value in accordance with ISO/IEC 24711 (for A4 size) using ISO/IEC 24712 test file, and ISO/IEC 29102 (for 4×6″ size) using ISO/IEX 29103 test file. Values obtained by continuous printing.

Reviews

There are no reviews yet.

Be the first to review “Canon Pixma E410 Printer”

Your email address will not be published. Required fields are marked *